Help! Rock damage!

[ROTAX]

Don't forget the UHMW roof for "those occasions".

RLMAO!! Angie, we are just gonna have to wrap your rzr in some serious bubble-wrap everytime we take you out

 

[dezerteryx]

i did the same thing but took out my frame and head pipe. got the Fiber Skinz full skid kit now.

 

[Dudeonit]

When I ran the standard RZR I used large fender washers stacked to add 1/4' clearance on the back rows of holes below the trans and engine along with the Holz spacers. This allowed the skid to deflect w/o contact to the engine, trans cases.

 

[Simi Dude]

If you need parts see Brian & Phill at Tower Works fab, (818-341-2580) they are in the Valley close to you. Tampa and Parthenia. he's got RZR stuff all over the shop and an excellet alum welder.

You would get along great with them.......Turbos and all that speedy stuff.

 

[dkiewicz]

If you need parts see Brian & Phill at Tower Works fab, (818-341-2580) they are in the Valley close to you. Tampa and Parthenia. he's got RZR stuff all over the shop and an excellet alum welder.

You would get along great with them.......Turbos and all that speedy stuff.

Ah, there we go Angie, a hook up!! Good on ya Zane...

 

[mosslager]

Okay I'm gonna say it... JB Weld it up

 

[onerich]

Okay I'm gonna say it... JB Weld it up

Does any one really use that stuff other then a trail fix ?

 

[mosslager]

When I was younger in high school I cracked the bottom of my transmission in my 1982 Honda Accord entering a driveway too fast. I woke up to a huge puddle of red fluid in the morning. Being a broke ass 17 year old I drained it and JB'd the bottom up and let it sit 24 hours..filled it up and ran it for another year like that and it never gave a problem. I would not dare do this to my RZR but I bet ya a case of your favorite beer it would hold if prep'd/applied properly. Theres nothing structural there and you are not dealing with high pressure.

 

[lmcarraher]

on my ford f450 where the oil dip stick mounts to the pan cracked and they said the body had to be lifted and motor raised to replace the oil pan and i was looking at 2k so i cleaned the crap out of it and jb welded it and its been a year now with no leaks

 

[07fj]

Yeah, if they were in stock and not $400+...

as of yesterday @ benchmark.

"I have in stock

1 XP Extreme and a couple of standards / S versions

3 Teryx front/ Mid / rear section ready to ship or will call or install"

 

[VBosch02]

I have a friend with a 08 rzr, put a hole in the case out in Barstow. Pulled the motor apart and JB welded it about 3 years ago. He has had no problems with it at all. But like said before prep is very important.

 

[speedyangie]

If you need parts see Brian & Phill at Tower Works fab, (818-341-2580) they are in the Valley close to you. Tampa and Parthenia. he's got RZR stuff all over the shop and an excellet alum welder.

You would get along great with them.......Turbos and all that speedy stuff.

Thanks Zane! I'll give them a buzz to see if they have a case or a used transmission.

Also, I love turbos.

 

[speedyangie]

Hmmm...all this JB Weld talk is also very interesting. I've used JB Weld successfully plenty of times.

 

[VBosch02]

Hmmm...all this JB Weld talk is also very interesting. I've used JB Weld successfully plenty of times.

It's been working great for my friend.

 

[JimandMelissa]

Hmmm...all this JB Weld talk is also very interesting. I've used JB Weld successfully plenty of times.

Look at it this way - If it doesn't work, what do you have to lose?

 

[VBosch02]

Look at it this way - If it doesn't work, what do you have to lose?

x2!

 

[Bajaxp]

Look at it this way - If it doesn't work, what do you have to lose?

Gear oil?

 

[VBosch02]

Look at it this way - If it doesn't work, what do you have to lose?

Gear oil?

haha

 

[JimandMelissa]

Gear oil?

There's gotta be one in every crowd

 

[speedyangie]

Pulling motor today to further assess damage and form game plan!