Yamaha Our new Ride....

ZTFab

Zero Tolerance Fabrication - Official UTVUndergrou
Well, I finally committed to getting a UTV. After searching and searching and trying to find a deal I settled on this.

It's an '07 Rhino that was built to race SuperStock in the Whiplash series. The previous owner, Todd W, who is an ME for Boeing, designed the car and had American Sand toys in AZ build it.

Full powder coated Chromoly Chassis complete with Aluminum Panels and Roof, along with Yamaha Silver plastics.

6.5" Long Travel Suspension with Fox 2.0x10" Remote Reservoirs and Dual Eibach Coils, Gorilla rear axles, and Gear One steering rack and HCR spindles. 13.5" of travel.

Stock 660 engine with K&N Filter Charger intake and CVT Filter, KMS Clutch Sheeve, Oil Siphon Break, CDI, all cooled by a PWR Radiator and Oil Cooler monitored by an Autometer Temp Gauge. Tuned by Weller Racing

Jaz 12 gal. Fuel Cell with side fill mount.

PRP Custom Hi back Seats with 5 point Crow harnesses and window nets.

(6) Beadlocked Rockstars by Beadlock Specialties with Maxxis Bighorn tires and (4) Carlisle 489s on Chrome Vision 161 Bruiser wheels.

(2) different front bumpers.

(3) Baja Designs Fuegos

We took it out to Barstow for my wife's Birthday this past weekend. We had a blast.

NewRhino1.jpg


Blasting down Main Pit in Barstow at full throttle and popped out a rear CV.....
FixingtheRhino.jpg


MeintheRhino1.jpg


AmandaintheRhino1.jpg
 
Took a ride to Slash X for lunch...
SlashX.jpg


All the "rides"...
OurridesatSlashX.jpg


My wife and our friend Kaylyn getting ready to rock the Rhino...
AmandaandKaylynintheRhino.jpg


My wife quenching her thirst after some awesome driving...
Amandachuggingbeer.jpg
 
Thanks Keith.

I will be changing some things over time to make it my own but I don't know if it will ever be as nice as yours.
 
Get rid of those Gorilla's Paul, don't want them popping out when we're all riding together in OW!!!

Congrats on the car, looks great!
 
im sure ypu will have a trick ass dash and console in that thing before too long and pimpen some trick aluminum work :D should have a good time at the dunes in it for sure , im building a light bar for mine and raising it up a little to get ready for halloween at the dunes :D:D
 
NICE PAUL!!! SO pumped you got a UTV now! Cant wait to go riding with you brotha! Like Danny said lets dial you in with some Summers Bros and stock CV's. Those Gorillas are going to give you fits. But you got time! The RHino looks awesome!!!!! Amanda is a champ, I want one of those belts!!! hhahahahhaahah
 
Yep...the Gorillas are gonna be on their way out.

First ten minutes of the trip and that's when the axle popped out....F that noise. I will be sporting the Summer's Bros soon....they are right down the street from me.

I can't wait to get out to OW with you guys. Not gonna make the DT in Glamis...too much stuff going on.
 
Its all good. d34thw1sh and I are working on a date for our first UTVUG trip of the season to OW. Probably in December! I am sure there will be a few runs inbetween now and then......
 
I dont think Todd had any real problems with his gorillas in his race day. After getting the HCR spindles on that car, it finished many races...
 
Yep...the Gorillas are gonna be on their way out.

First ten minutes of the trip and that's when the axle popped out....F that noise. I will be sporting the Summer's Bros soon....they are right down the street from me.

I can't wait to get out to OW with you guys. Not gonna make the DT in Glamis...too much stuff going on.

do the gorillas still have the pin in the dif??? if so take it out, make sure the large clip on the inner cv is not rounded off, if so get new ones.

I race with gorillas and never an issue.

6.5 kit? LSR maybe?? I have never broken one of their axles either on my own rhino.
 
Nice ride paul !! Looks like i might have some fun with my gorilla axles letting me down ?? cool pics ,, i dig your ladys belt !! i gotta get one of those !! good luck with your new toy !! :D
 
I never had a single problem with my Gorillas (even with the center pin in). My buddy with the same kit has had the pass rear pull out a few times, were going to pull off the center pin and see if that fixes it.

By the way, the new car looks great. Cant wait to see what cool tweaks you do to it, to make it yours!
 
Pitted with todd at many races, he never had axle issues with the car. Not a LSR kit, Todd designed and built the LT kit.
 
Holy crap you finally picked one up! I need to check it out. I'm sure it's going to make a 360 degree turn into something crazy :)
 

Members online

No members online now.

Forum statistics

Threads
17,298
Messages
179,396
Members
12,147
Latest member
Williamobjem
Back
Top