My BITD rzr xp4 build thread

[Big Guy]

Side panels and the rigid rear facing safety light mounted... View attachment 9160View attachment 9161

You might want to check with Cory from UTVRA and make sure that light is legal for BITD.

 

[shrive81]

It is... It has been passed already by inspection on other vehicles... They only light I don't have is the bitd blinking blue light that I are required to run that can't be built into the light

 

[Big Guy]

It is... It has been passed already by inspection on other vehicles... They only light I don't have is the bitd blinking blue light that I are required to run that can't be built into the light

Right on, car looks great by the way! I used to race BITD, it's tons of fun good luck.

 

[shrive81]

Thanks I appreciate it looking forward to it

 

[shrive81]

New 21v impact for car... Gotta be quick with the tire change..View attachment 9172

 

[shrive81]

New shocks from elka have arrived with custom progressive springs for extra car weight and long stroke for Long travel setup.. Can't wait to put these bad boys to the test!!!! They are works of artView attachment 9181View attachment 9182View attachment 9183View attachment 9184

 

[TTSH]

Looking good!!

 

[shrive81]

Met with Thad from fabwerx at his shop and went over a few final things for the car layout... This things is amazing looking... Can't thank Thad enough for the work he does amazing work...

View attachment 9211View attachment 9212View attachment 9213View attachment 9214View attachment 9215

 

[shrive81]

So we decided to change our logo for the team, I made the decision after looking at what we created was to close to Cognito Motorsports logo and don't want to copy or upset anyone.. I did love our logo but I think that our new logo is very nice and will look awsome on the car and will be the new emblem to represent our team!!


View attachment 9226View attachment 9227View attachment 9228

 

[shrive81]

Got the new umhw skid from UTV inc to help protect the bottom of the car and the new front bracing setup from dragon fire racing the thing is nice it ties the entire front end together... View attachment 9238View attachment 9239

 

[JoeyD23]

This car is going to be insane!!!

 

[shrive81]

Thanks Joey and you better believe it will be rocking the UTV underground logo

 

[shrive81]

Building a chase rack for the car trailer will hold two 11 gallon dump cans and 5 spare wheels and tires along with a top deck for pit boxes... Will also wire lighting on the rack for night time work...View attachment 9244View attachment 9245View attachment 9246

 

[shrive81]

A big thank you to Thad at Fabwerx for all you did! The car is officially on its way home! View attachment 9291View attachment 9292View attachment 9293View attachment 9294View attachment 9295

 

[aaronjuarez]

Nice work, both on the car and the trailer

 

[Bumpers]

That thing is awesome. I love the bitd cars.

sent from a payphone

 

[XPirate]

Clean up on isle PANTS!!!!!!!!! This ride is so bad ass, I love Thad's work, his desert cars are sweet!!!!!

 

[shrive81]

So needless to say u can tell I'm not a big budget team hence the whole car build in my garage and u can also see I still have ALOT of work to do... Can't wait View attachment 9312View attachment 9313View attachment 9314

 

[shrive81]

View from inside the car and initial layout of the dash View attachment 9329View attachment 9330

 

[shrive81]

Little update on the build so far... I realized I had a ton of things to still figure out and make work... The title things like mounting the charging system in a new spot and the computer etc along with making everything work and have ease of access if need be... We got alot of work done the last two days from fitting the floor and laying out the dash and installing the new suspension all the way around... We also took care of alot of those little things like finding new homes for the parts that moved or lost their original mounting spot from the build... Hope to have the fuel system and colling system finalized tomorrow and start welding a few more mounts and cut the dash for all the gauges and radios... This is a huge undertaking but having a blast doing it and this is a family team and really enjoying building this with my close friends and family... I know we aren't a big budget team but we have more heart and soul into this and it means more to us cause this is bringing everytime together... The lonestar suspension is looking really good and below is a few photos of the rear suspension with full droop and full compression... With close to 17" of travel I think it should handle well through the rough stuff and high speed...

View attachment 9343View attachment 9344View attachment 9345View attachment 9346View attachment 9347