Flex your R/C's **Show em off!**
- Thread starter JoeyD23
- Start date
BrianAshby1
SilverBulletXP4 Sucka!
bought the low model sc10 with the brushed motor to see how i would like it... LOVED IT since then i have bought the LRP short course brushless combo motor/esc, two orion 5000mah 35c lipos, RPM front bumper, RPM ball heavy duty ball caps, team associated factory blue turn buckles and a new proline raptor f150 body... haha the wife hates it.. but i plan on doing alot more to it 
Attachments
JoeyD23
#utvunderground
DAMN the Raptor body looks hard!!! I need some ideas to G my SC10's out. These things are way more sophisticated than the Slash.
Brian, my SC10 seems slow out of the box for a brushless. Do you have to set the throttle on the controller or program the speed control or something? Maybe it was just cause the Lipo battery I had in it was small? Any info?
Brian, my SC10 seems slow out of the box for a brushless. Do you have to set the throttle on the controller or program the speed control or something? Maybe it was just cause the Lipo battery I had in it was small? Any info?
JoeyD23
#utvunderground
BrianAshby1
SilverBulletXP4 Sucka!
To be honest I got lucky and didn't have to set mine, so I haven't got into throttle settings, what gearing you running? I have a 10.5 turn motor and gearing is 23pinion stock87 spur, it gets on it pretty good setup like that
A good lipo helps to, i noticed a huge difference with my new battery... is yours a 2s?
JoeyD23
#utvunderground
I havent bought any batteries yet. I used one that Danny had at the shop. I havent even peeled the plastic off the truck yet. I just drove it down the driveway. It seemed slow to me? Its a bone stock SC10 Brushless with the 3300kv Brushless motor. I have no idea on the gearing
BrianAshby1
SilverBulletXP4 Sucka!
ya the stock brushless motor is a peice of crap, my buddy bought the stock brushless one to, ended up switching to a castle mamba max pro and his car is stupid fast!!!
look into new motor/esc combos... i went with LRP but castle makes bitchin stuff to
look into new motor/esc combos... i went with LRP but castle makes bitchin stuff to
BrianAshby1
SilverBulletXP4 Sucka!
So far no problems, motor is sensored so it should shut down before it's to hot right?
BigD's Upholstery
New Member
Joey check to make sure your radio throttle is turned all the way up,this may fix your problem.Also a good 2s lippo does help!Leave the gearing alone it will help the motor last longer.Unless you change to a different motor and esc.
BigD's Upholstery
New Member
I would run a 84 spur with a 20 pinion with a 10.5 brushless set up.That truck will haul some assss!!
BigD's Upholstery
New Member
Also you guys running a SC10 add 3oz of lead weight to the back of the chassis under the foam block behind the battery,then put the foam block back.Your truck will handle like never before.
Cool video from the scale crawler nationals.
<iframe src="http://player.vimeo.com/video/12219910" width="800" frameborder="0" height="531"></iframe>MSD Scale Nationals Teaser#1 from Brett Carlson on Vimeo.
<iframe src="http://player.vimeo.com/video/12219910" width="800" frameborder="0" height="531"></iframe>MSD Scale Nationals Teaser#1 from Brett Carlson on Vimeo.
bigjoeymunoz
New Member
Attachments
those are so sweet!
Flashgordon
New Member
Here is most of my collection, this used to be my hobby before the RZR, not to mention the truck load of stuff I have to maintain these things! Tires, starter boxes, chargers, spare parts etc.....
My pride and joy is not in the picture, my original 80's Tamiya Bruiser, I put the manual and the trans in the pic since it is being rebuilt. I have all the original parts for it except for the body.
My pride and joy is not in the picture, my original 80's Tamiya Bruiser, I put the manual and the trans in the pic since it is being rebuilt. I have all the original parts for it except for the body.
Similar threads
