UTV World Championship Race Schedule / Details / Updates
- Thread starter JoeyD23
- Start date
JoeyD23
#utvunderground
If your car meets worcs/lucas oil/GNCC/dirt series etc, then you are all good to race the short course race. Spread the word!!!
JoeyD23
#utvunderground
REGISTRATION NOW OPEN: http://bitd.com/best-in-the-desert-...ip/item/73-gpr-laughlin-ushs-information.html
DRAWING FOR STARTING POSTIONS IS ON FEB 10th!!
DRAWING FOR STARTING POSTIONS IS ON FEB 10th!!
Blue Coyote
Member
#997 taken
JoeyD23
#utvunderground
To be clear. All racers will have to purchase a $50 BITD membership. This is essentially what covers the insurance. There will then be a $25 tech fee which pays for our tech inspection. Sorry about the small fees guys. We tried to keep entry fees as low as possible while still maintaining a high level race atmosphere. I promise we are stoking every registered racer out with a solid gift bag though!!
Blue Coyote
Member
Any word on Saftey Rules?
We are building to WORCS - and it said DOT or SNELL helmet and fire suit - but no specs like LORRS or BITD.
Clarification on specifics would be great.
Thanks
We are building to WORCS - and it said DOT or SNELL helmet and fire suit - but no specs like LORRS or BITD.
Clarification on specifics would be great.
Thanks
JoeyD23
#utvunderground
Production UTV Requirements (1000, 850, 700)
1. 6 Point Roll-Cage. (Factory cage OK as long as it meets 6 point minimum)
2. Side Panels / Doors (Doors must be secured to prevent from popping open)
3. Window Nets or Wrist Restraints
4. Roof Panel
5. One 2.5lb Fire Extinguisher Mounted On UTV w/ Quick Release.
6. 5- Point Seat Belts - 2†or 3†Wide Belts OK, 3†Preferred
7. Working Tail-Lights & Brake Lights
8. One Piece Fire-Suit
9. Helmet w/ DOT or Snell Decal. Eye Protection Must Be Shatter Resistant.
10. Gloves and Neck Brace Are Recommended
11. Numbers On Both Sides Of Vehicle. Minimum 8†Tall Numbers, White Background w/ Black Numbers (Refer To BITD Entry Form For # Assignment)
12. One 2.5lb Fire Extinguisher In Your Pit. Must Be Near Vehicle During Fueling.
13. $25.00 Cash Only Tech Fee Due At Time Of Inspection
Production UTV RZR 170 Class Requirements
1. Polaris RZR 170 Vehicle
2. Aftermarket Cages & Suspension Are Allowed
3. Driver Must Be At Least 6 Years Old & No Older Than 12 Years Old
4. Polaris RZR 170 Engine Must Be Used. Modifications Are Allowed
5. Driver Window Net Or Wrist Restraints Required
6. If Racing w/ A Passenger, A Passenger Net Or Wrist Restraint Also Required.
7. 5-Point Seat Belts Required For Each Occupant
8. All Occupants Must Wear Helmet, Eye Protection, Long Pants & Long
Sleeve Shirt. Fire Suit Is Recommended
9. Race Numbers On Both Sides Of Vehicle & The Rear Of The Vehicle. White Background w/ Black Numbers. Minimum 6†tall. (Refer To BITD Entry Form For # Assignment)
10. Aftermarket Roll Cage & A Roof Panel Is Recommended
Please contact Cory Sappington with any questions 602-769-6164
1. 6 Point Roll-Cage. (Factory cage OK as long as it meets 6 point minimum)
2. Side Panels / Doors (Doors must be secured to prevent from popping open)
3. Window Nets or Wrist Restraints
4. Roof Panel
5. One 2.5lb Fire Extinguisher Mounted On UTV w/ Quick Release.
6. 5- Point Seat Belts - 2†or 3†Wide Belts OK, 3†Preferred
7. Working Tail-Lights & Brake Lights
8. One Piece Fire-Suit
9. Helmet w/ DOT or Snell Decal. Eye Protection Must Be Shatter Resistant.
10. Gloves and Neck Brace Are Recommended
11. Numbers On Both Sides Of Vehicle. Minimum 8†Tall Numbers, White Background w/ Black Numbers (Refer To BITD Entry Form For # Assignment)
12. One 2.5lb Fire Extinguisher In Your Pit. Must Be Near Vehicle During Fueling.
13. $25.00 Cash Only Tech Fee Due At Time Of Inspection
Production UTV RZR 170 Class Requirements
1. Polaris RZR 170 Vehicle
2. Aftermarket Cages & Suspension Are Allowed
3. Driver Must Be At Least 6 Years Old & No Older Than 12 Years Old
4. Polaris RZR 170 Engine Must Be Used. Modifications Are Allowed
5. Driver Window Net Or Wrist Restraints Required
6. If Racing w/ A Passenger, A Passenger Net Or Wrist Restraint Also Required.
7. 5-Point Seat Belts Required For Each Occupant
8. All Occupants Must Wear Helmet, Eye Protection, Long Pants & Long
Sleeve Shirt. Fire Suit Is Recommended
9. Race Numbers On Both Sides Of Vehicle & The Rear Of The Vehicle. White Background w/ Black Numbers. Minimum 6†tall. (Refer To BITD Entry Form For # Assignment)
10. Aftermarket Roll Cage & A Roof Panel Is Recommended
Please contact Cory Sappington with any questions 602-769-6164
SimsMotorsports
Factory Polaris #1913
Joey, just to be clear these are the rules for the short coarse race correct? The BITD race has to be raced with a BITD spec car correct?
JimandMelissa
UTVUndeground La Familia
We're in to spectate 
JoeyD23
#utvunderground
So I am going to be in Glamis through Prresidents day and maybe longer. I am thinking about heading up to participate in the poker run and spectate the races. Is there a place to camp the toy hauler? AND can we ride from there to casinos or track, etc in our SXS? Trying not to complicate but also don't want to go home and then drive right back out again. Thanks!
JoeyD23
#utvunderground
Only racers and their teams at this point will be allowed to camp in the pits. I am sure there is an RV park in Laughlin. I do not think you can drive your SXS to and from the race track unless there is an RV park close by the start finish line. Might be easier to just get a hotel for the cost of it, park in overflow then just trailer your UTV over to the poker run area. Everything is pretty much done at Harrahs hotel so no need for a ton of transportation.
Similar threads
