RZR S sound system

crnacnac

Bumps In Tha Trunk - UTVUnderground Approved
A friend just picked up this RZR-S last week and is having me install a system along with some other items.

Kenwood DNX540 with Nav, iPod, and Sirius
ALPINE PDX-2.150
ALPINE PDX-1.600
(2) ALPINE SPX-17REF
JL 12W3v3-2
Optima Yellow Top
PAC isolator


DSC01146.jpg


DSC01126.jpg


DSC01127.jpg


DSC01128.jpg


DSC01129.jpg


DSC01130.jpg


DSC01148-1.jpg


DSC01149-1.jpg


DSC01150-1.jpg


DSC01151.jpg
 
Holy crap! Nice work. But you should have checked out SSV Works for the speaker pods. Would have saved a lot of custom fab.

Thanks for the info. I know Trevor and buy from him when needed.

My friend wanted the custom work, one off system, and money is not an issue with him. Trevor's box is for a 10", I'm installing a 12", and where it mounts I couldn't use it any way because it would be in the way of the headunit. Trevor's speaker pods house 6X9's, I'm installing 6 1/2 separates.
 
Holy crap! Nice work. But you should have checked out SSV Works for the speaker pods. Would have saved a lot of custom fab.

Thanks for the info. I know Trevor and buy from him when needed.

My friend wanted the custom work, one off system, and money is not an issue with him. Trevor's box is for a 10", I'm installing a 12", and where it mounts I couldn't use it any way because it would be in the way of the headunit. Trevor's speaker pods house 6X9's, I'm installing 6 1/2 separates.

That should be a thumping system for sure. Very nice work.
 
I got a little side tracked with some new goodies that arrived. Momo wheel, PCI intercom system with car to car, Icom race radio, and Muzzy's twin exhaust with fuel controller. But I did manage a final test fit of all the glass pieces before polyprimer. The horn buttons on the Momo will activate the relays which will control the actuator for the lightbar.

DSC01211-2.jpg


DSC01212-2.jpg


DSC01216.jpg


DSC01217.jpg


DSC01213-2.jpg


DSC01214.jpg
 
Those Muzzys look clean!

Jon, are you going to wire those buttons on the momo for PTT? I have the same wheel and do not know how to do this...it would be sweet if you did wire them if you did a step by step picture tutorial! Hook it up!!

Keep the great work up!
 
Those Muzzys look clean!

Jon, are you going to wire those buttons on the momo for PTT? I have the same wheel and do not know how to do this...it would be sweet if you did wire them if you did a step by step picture tutorial! Hook it up!!

Keep the great work up!

That sounds like a cool idea. He will be using the horn buttons for the lightbar actuator.
 
I cleaned up all the pods edges to the speaker grill, fabbed the amp racks, and got the tins back from upholstery-cf for the doors, and ostridge for the roof.

DSC01219.jpg


DSCF0074.jpg


DSC01220.jpg


DSC01221.jpg
 
All fiberglass pieces polyprimed. The sub box has brackets inside with nuts welded to them so the box, sub, and grill can be installed as one unit and bolted from the outside. Also installed and wired the Odyssey, Optima, Pac isolator, charging post, and circuit breakers.

DSC01223-1.jpg


DSC01224-1.jpg


DSC01226-1.jpg


DSC01227-1.jpg


DSC01228-1.jpg


DSC01229-1.jpg


DSC01230-1.jpg


DSC01231-1.jpg
 

Members online

No members online now.

Forum statistics

Threads
17,313
Messages
179,416
Members
12,154
Latest member
KpALMA
Back
Top