**CONTEST** Simpson RACER Giveaway **CONTEST**

[JoeyD23]

Simpson Race Products and UTVUnderground.com wants to give one UTVUnderground.com Racer a set of their brand new D3 5 Point Restraints!​

D3 RestraintExclusively from Simpson, the D3 provides the ease and convenience of a sewn in harness without the harness being sewn into the lap belt. The D3's unique design eliminates 2 links while still allowing the shoulder harness to be joined closely at the buckle, emulating a 5-point latch and link system.
Simpson Racing - D3 Restraint Simpson Off Road Restraints [D3] - - It's Free! :



So here's how you WIN!

To enter into the contest you need to post in this thread atleast 1 still photo of your Race built UTV and atleast 1 action action photo or build photo of your UTV. We then want to know about your UTV and what makes it original, who built it, what your favorite features are, what your saftey features are, and feel free to tell us any other information you feels makes your UTV original. Of course you can list your sponsors as well!


Voting will begin on Febuary 22nd by our members here. The winner will be announced on Febuary 26th and the winner will be awarded a pair of Simpson D3 Restraints in the color of their choice!!


Simpson Logos and UTVUnderground Logos are not required in the shot but are always welcome!!!

You must be a UTVUnderground member to enter. Only one entry per race vehicle, meaning multiple team members cannot enter the same car but can post up to add to the origional team members post.

 

[AZCourt]

Re: **CONTEST Simpson RACER Giveaway **CONTEST**

Cool Joey!!

 

[JoeyD23]

Re: **CONTEST Simpson RACER Giveaway **CONTEST**

Get it going Court!!!

 

[Hounslow]

2007 Rhino 660 soon to be 720

Web 737 grind cam

ported and polished

Two brothers Dual exhaust

Sheave and weights (switching to pdm clutch this week)

Large Oil cooler W/9" Fan

Long travel industries long travel

King shocks

Rci Fuel cell

Bs Sand seats

4) Hella HID on motorized Light bar

Rear Led light bar

DWT Diablo Beadlocks

26" Big horn tires

Full cage dropped and widened

Xmf Front Bumper

Rugged Radio Intercom and Car to Car

Parker Pumper Fresh Air system

(Sponsers)

Hot rods/Hot Cams, Cp Pistons, Amsoil, DWT, Wreckage Clothing, NAATV, Long Travel Industries

 

[STETLER]

started as a 2006 full rhino that me and my best friend Todd (owner or 151 Fab) built entirly in my own garage. No work bench, No vise, No sheet metal tools but a bead roller.

Thanks for all your guys comments and all of the great support ($$) , parts and direction from some of the Vendors on here. RUGGED RADIOS,UTV CRAP, BOOYAA CREW, UTV UNDERGROUND, KING SHOCKS, and of course 151 FABRICATION (updating the website soon). It only took me 2 years to finish this car.

List of parts on this build:
2007 R1 Motor
Custom wiring harness (only took 4 harnesses to get it right)
Completly Chromoly chassie (except the stock rhino center floor)
KarTech 930 race Axles
RBP 930 Micro stubs and Billet 4 piston calipers
Mckenzies 930 raceprep Cv's
Jeffco Reverse Box
PRP seats with 5. Crow belts
Rugged Radio- intercom w/DSP & car ro car & ipod mount
Hella 4000 HID lights w/ front light bar & actuator- all on quick release
(5) BFG Mud Terrain w/ Powder coated center line offroad racing rims
Custom mad rear rims w/ Xtreme Sand Squirts - Comp cut
Front Smoothy 28" tires
custom made KING 4 tube 2.5 X 16" rear Bypass W/ 14" 2.0 rear coil carrier
KING 3 Tube 2.5 X 14" front Bypass w/12" 2.0 front coil carrier
Braided brake lines connecting to WilWood reverse hanging pedals
Billet Gas Pedal
840c Baja Lowrance GPS
Grave Titanium mufflers - w/ ceramic coating
Custom equial Length Header w/ ceramic coating
Aluminum Tie rods connecting to a custom machined steering box
Rear LED light bar
Fluidyne Dual Pass Radiator w/ All Silicone Blue Hoses
SideWinder Chain - Rated at 18K Lbs of strength
Beard window nets
Aftermarket Hood and rear fenders - all on quick release pins
Full Belly Aluminum skid plates for Desert prerunning
18G center mounted fuel cell with Foam installed
(2) Billet fuel filters and a inline electric fuel pump w/ billet Reg.
(8) Mckenzies Limiting straps- 2 per corner
32 Peices of custom made aluminum interior and exterior
Lots of Laser cutting


Some of the features it has:

22" of rear travel (strapped short)
21" of Front travel (with absolutly no bump steer)
Custom built Trailing arms that allow the rear paddles to sit in more
Weight - Dry 1530 Lbs The car is exactly 100 Lbs havier in the rear
92" Wheel base
Laser cut and tig welded rear shock tower that was designed to stay clear of the pass and drivers head incase of a roll over.
Laser Cut and Tig welded Bulk head to match the upper front shock tower.
Light bar is Actuated
Quick pins will remove the following in seconds- rear bumper, light bar, side steps, hood, rear fenders, Steering wheel, rear LED light bar.
Tilt steering wheel.
The car seating and pedas were set up with in 1" of a brand new 09 chevy full size truck.
Custom dash - made to look similair to a old corvette
Front J-Arm suspension

I'm sure I'm forgetting about 2000 more things but You guys get the picture.

Built 100% in my garage with plenty of pics to proove it.

[ame=http://www.youtube.com/watch?v=18iwKUwcTxc]YouTube - R1 RHINO by 151 FABRICATION[/ame]

 

[JoeyD23]

competition stiffens up!!! Lets go...we have more racers ont his site then most all others combined. This should be one bad ass thread if done right and someone is going to get a set of the nicest restraints in off road thanks to Simpson Race Products!!

Simpson Racing, Simpson Performance Products, Simpson Racing Products, Team Simpson - Team Simpson

 

[AZCourt]

I started with a 2006 family truckster. It was a 4 seat XMF suspended 686 motored rhino. One day got a wild hair up there and decided to try and race. XMF had a chromoly bolt on cage that someone ordered and didnt end up getting so I got a smokin deal on it. Scott made some sheetmatal doors and we were race ready.

The list.
XMF suspension, cage, sheetmetal and fab work
686 11:1 Racers Edge head with +1 valves
Ron Woods pipe and carb kit
Dynatek CDI
PDM Clutch
Beadlock Specialties Wheels
Bighorns
Jet Trim seats

The build

Racing!!

 

[JoeyD23]

that is awesome COurt!!! Thanks for posting up and participating!!!

 

[JoeyD23]

TTT

 

[JoeyD23]

comeon, all these racers in here and no one wants to win these harnesses???????? WHAT UP UNDERGROUND??? Lets show the vendors that we want these giveaways!!!

 

[JoeyD23]

racer giveaway!! COME ON GUYS!!! You dont have to win them to run them in your car, win them to run in your play car or give to a teamate! LETS GO!

 

[zerozerofour]

Hey Guys,
I'm still kind of new in this forum, but here is some info on my UTV.

2007 Redline Revolt

Modifications:
- Big Gun pipe & fuel programer
- King coilovers
- upgraded 1.5 moly cage
- Heavy Duty Rear links
- beefed up A arms
- OMF Beadlocks all around
- Rear Bighorns
- Front afterburns
- alum skid plate
- alum firewall
- crow 5 point belts
- x vision light bar
- custom front & rear bumpers
& little details that one forgets but add up in the pile of $$$...

Sponsors:
- Big Gun
- (Looking for more)

Future mods in mind:
- fuel cell
- clutch mod

couple of shots from the glen helen off road short course series....
hope you guys like it... any comments welcome...

 

[the stripping shop]

 

[the stripping shop]

This are race some pics from blue water of 09 to recent.Full chromolly frame from pick up point to pick up point.We made all a-arm points same as stock plus beefed up frame since the rzr frame isn't so strong.This frame is all to bitd rules and yes the stock frame rails are in it. Here is a list of parts Fox 2.5 internall by-pass,custom 6'' a-arms with brass bushings,gear one rack,oddysey battery,hella horns,gps,pci race radios,jet trim seats,gorilla axles,dj seat belts,innovative air/fuel gauge,fuel pressure gauge,water temp,omf bead lock wheels,big horn tires,tire ballz,fst billet hubs,hpd rear end housing,hpd oil cooler,hpd bored throtle body,holtz intake,atl fuel cell,parker pump,bosch fuel pump,aeromotive fuel regulator,muzzy's exhast we just got off play car,donaldson custom air cleaner,custom made radiator,pci helmets and race suits,simpson helmet for fat head,kroyer motor/hpd,i most likely missed some stuff

 

[JoeyD23]

Awesome posts guys!! Great cars!!

Rito hit up the RZRs Edge boys next time you see them, we stocked them up with UTVUG sticks!

 

[the stripping shop]

i will do that

 

[STETLER]

bump

 

[JoeyD23]

TTT!! Only a couple more days!

 

[JoeyD23]

ok, we are coming down to the wire....since interest was somewhat low UTVUG staff will decide which one we liked best. Still have time to get some more entry;s in!! lets go racers!!! Show the site and the vendors we want more of these contests or giveaways for you guys!

 

[Wild Earp]

Heres Mine

Car was built as a true dual sport racer, with front and rear removable bumpers, one for each for Desert (with 2 spare tires), and Short Course. Current configuration is for short course, powered by a Yamaha R1 1000cc street bike motor and chain drive 2WD, for the new SR1 UTV class at the Lucas Oil Off Road Racing Series.