Baja Designs: General Discussion Thread

Baja Designs said:
Baja Designs said:
SAE Lighting - Update

Many people have heard information from myself and others at BD regarding SAE approved lighting. We are NOT releasing these until 2019 and can only share very few details until then. Expect more information in the New Year...

- Squadron Series housing
- Lights will be sold with or without Vehicle Specific Kits
- The goal is to have the pair of lights sell for under $300
- No information at this time on adapting SAE approved lens and optics to older Squadron Series Lights

Thanks for all of the interest. More details including an expected release date will be posted in the New Year :)

Baja Designs
www.bajadesigns.com
Click to expand...


UPDATE

We are still aiming for a release in the first quarter of 2019. Our ETA at this time is towards the end of February or March.

The goal is to start pre-orders at the end of this month or in February. I'll post details as we get closer to starting pre-orders.

Thanks, Everyone!

Baja Designs
www.bajadesigns.com
Click to expand...


February 7, 2019 | UPDATE

Unfortunately, we ran into a delay for these lights. There are a few details we are working out before these lights can be released to market. We are aiming to provide the best SAE approved lighting as soon as we can.

ETA: June, 2019

Baja Designs
www.bajadesigns.com
 


ROCK / DOME LIGHTS

91bdfe65-6d75-410b-a1c9-aa47f5864048.jpg

47085617041_7dac5f0270_z.jpg

Updated as of 1/1/2019

ORDER NOW

​
 
2016%20Lighting%20Zones%20Chart.jpg



Lighting Zone: Off Road Enthusiast
These zones have been designed by Baja Designs: The Scientists of Lighting.

Zone 1 - Dust/Fog: This zone illuminates the area directly in front of the vehicle. Mounting these lights low on the bumper eliminates glare from dust and fog.

Zone 2 - Cornering: This zone provides cornering light which is necessary to drive comfortably at speed. By toeing these lights out 10°-15° a smooth field of light is achieved, eliminating the feeling of tunnel vision.

Zone 3 - Driving Combo: This zone is your primary driving light. These lights are mounted in the middle of the front bumper to avoid glare off of the hood or from dust and fog in front of the vehicle.

Zone 4 - Spot: This zone is your first level of long distance lighting. Lights intended for this zone will give you the distance needed to travel at speed. Combined with zone two lighting, a smooth transition is achieved creating less stress on your eyes.

Zone 5 - Racer Edition Spot: This zone is necessary for triple digit speeds, or wanting to see miles down the road. This is the only forward projection pattern we recommend mounting along your roofline (wider patterns can contribute to glare).

Zone 6 - Rock/Dome Lighting: This zone is used for wheel well lighting. This light is perfect for truck, jeep, buggy and UTV applications.

Zone 7 - Work/Scene: This is a true flood pattern. Excellent work light or “scene light” with an extremely smooth, round pattern. This pattern is not suitable for forward projection applications.

Zone 8 - Backup Lighting: This zone illuminates the area directly behind the rear of the vehicle. It is recommended that these lights be mounted on your rear bumper or cargo rack.


Via Baja Designs | Lighting Zones

Baja Designs
www.bajadesigns.com
 
*** Attention Honda CRF 450L Owners and other Motorcycle Enthusiasts ***





Looking to add performance on and off the street to your 450L? This is the kit for you, it utilizes your factory wiring and bar switch giving you a true plug and play setup with Hi/Lo functionality! The kit includes a mounting bracket that uses factory tabs, one Squadron Pro, and one S2 Sport.


Honda, CRF 450L, Headlight Kit, Squadron Pro/S2
Sku 490050 | $374.95 ------ $337.46 w/ Coupon Code: BDForums
Available Here


Includes:
Squadron Pro / S2 Sport Motorcycle Light
Adapter for CRF450L


S2 Sport Specifications:
Lumens: 1,130 Utilizing 2 LEDs
Wattage/Amps: 12W / .9A
Dimensions: 2.93" x 1.76" x 1.68"
Weight: 8 ounces
LED Life Expectancy: 49,930 Hours
Front Lens: Hard Coated Polycarbonate
Housing: Hard Anodized & Powder Coated Cast Aluminum
Bezel: Billet Machined Aluminum
Hardware & Bracket Material: Stainless Steel
Exceeds MIL-STD810G (Mil-Spec Testing)
Built-In Overvoltage Protection
IP69K (Waterproof up to 9ft & Pressure Washable)
IK10 Compliant (Mechanical Impact Testing)

Squadron Pro Specifications:
Lumens: 4,900 Utilizing 4 Cree LEDs
Wattage/Amps: 40W / 2.90A
Dimensions: 3.07" x 2.77" x 3.07"
Weight: 12 ounces
LED Life Expectancy: 49,930 Hours
Front Lens: Hard Coated Polycarbonate
Housing: Hard Anodized & Powder Coated Cast Aluminum
Bezel: Billet Machined Aluminum
Hardware & Bracket Material: Stainless Steel
Exceeds MIL-STD810G (Mil-Spec Testing)
Built-In Overvoltage Protection
IP69K (Waterproof, Submersible to 9ft)
IK10 Compliant (Mechanical Impact Testing)

 
 
PRODUCT SPOTLIGHT

670006_n.jpg


XL80, Work/Scene

The XL80 Work/Scene light puts out a show stopping 9,500 lumens. Ideal for illuminating work spaces, camp sites, and anything in between. The XL80 Work/Scene outputs an extremely smooth 120° pattern that projects well past the 400ft mark, while providing usable light to a minimum of 250ft. As this is not a distance oriented pattern and we do not consider suitable for driving.

The XL80 Work/Scene is offered with its own specific bracket that is designed to provide maximum adjustability. Similar to the rest of the premium members of the XL series, the XL80 offers an optional 20% dimming feature. As always, Baja Designs offers a 30 Day Satisfaction Guarantee, and Limited Lifetime Warranty.

AVAILABLE HERE
 
Effective April 1, 2019, Baja Designs Chief Operating Officer, Trent Kirby, has been promoted to the role of Chief Executive Officer. Deanne Moore, who was Baja Designs previous CEO, will be retiring from the full-time position, but will maintain her relationship with Baja Designs through her consulting business. She looks forward to having more time to do what she loves… off-road.
Trent started his career with Baja Designs nearly a decade ago and has worked his way through just about every role in the business. He comes from a family of off-road enthusiasts and has been working in the industry since 2005. He is well versed in not only the Off-Road industry, but the Powersports and Automotive industries as well. As an enthusiast, he enjoys riding his dirt bike in the open desert, on single-track trails, as well as some dual sport riding. If he’s not on his dirt bike, you can either find him mountain biking or pushing the limits in his side by side.
Trent is confident that his years of training under Deanne in addition to working in all of the different departments within Baja Designs have set him, and ultimately the business, up for success. “Our racing heritage and our passion for the off-road industry will guarantee that we continue to develop and deliver the highest performing and superior quality lighting solutions we are known for,” Trent Kirby, CEO.

Read more by clicking the link below:
Baja Designs - New CEO Announcement

 
FULL LASER ONX6 LIGHT BARS

We are proud to announce the industry's first full laser light bar! The OnX6 Full Laser features 6 laser diodes per 10-inch section. Paired with our High Speed Spot optics, these laser chips produce an extremely tight 1.5° pattern and are capable of throwing light 350% farther than current premium LED offerings.

Baja Designs | OnX6 Full Laser Light Bar




LASER UPGRADE PROGRAM
SEND IN YOUR CURRENT ONX6 LED LIGHT BAR TO UPGRADE THE CIRCUIT BOARD TO NEXT GENERATION LASER TECHNOLOGY.
PLEASE GIVE US A CALL TO GET STARTED:

1-800-422-5292

10" HYBRID LASER/LED CIRCUIT BOARD: $650 PER 10-INCH SECTION
- 2 LASER CHIPS, 4 LEDS
- LUMENS: 7,760
- WATTAGE / AMPS: 95W / 6.9A
- SIZES: 10", 20", 30", 40" & 50"

10" FULL LASER CIRCUIT BOARD: $1,450 PER 10-INCH SECTION
- 6 LASER CHIPS
- LUMENS: 3,000
- WATTAGE / AMPS: 90W / 6.5A
- SIZES: 10", 20", 30", 40" & 50"

Baja Designs
www.bajadesigns.com
 
Baja Designs | SAE Approved Lighting | 4/25 UPDATE

Our team is working hard to release the SAE approved lighting. The ETA is currently set for June. White will be the first color released. We are currently working on getting the Amber finalized. I hope to start Pre-Orders soon. Please keep an eye out for details!

Note: There will NOT be an SAE Lens Kit available. SAE approved lights use a completely different lens and optic compared to the normal Squadron. Customers will have the option to send their light in to be upgraded, I hope to share pricing and other details soon.

Baja Designs
www.bajadesigns.com
 
Rear Tail Lights

This rear facing tail light is a first for Baja Designs, but includes quality and styling that is unique to BD. This slim and sleek package includes our proprietary MoistureBlock Technology, Lifetime Warranty and the highest quality of components. With a choice of two configurations, this bar is perfect for the recreational enthusiast looking for more safety on the trail, or for racers powering through the course.

RLT-M Features: Running Light - Brake Light - White Cargo/White Light - Downward Facing License Plate Light (Available w/ out plate light)

RTL Features: Running Light - Brake Light - White Cargo/White Light - Amber

RTL-S Features: Running Light - Brake Light - Flashing Amber Turn Signals, White Work/Cargo Light

RTL-B Features: Running Light - Brake Light - Blue Safety Light (Designated for slower moving vehicles) - Flashing Amber

RTL-G Features: Running Light - Brake Light - Green Safety Light (Designated for slower moving vehicles in CA Racing Promotions) - Flashing Amber


AVAILABLE HERE

103004_t.jpg
 




Here at Baja Designs we know that you’re interested in a quality product that you can rely on for work, weekend adventures, and for the ultimate driving experience. Our products face rigorous testing before they are made available to the public and we ensure that they have the proper technology accompanying the performance to make the product last a lifetime. One of the requirements we put on all our LED lights is the IP69K standard.



Many of our competitors have an IP67K rating instead of IP69K. Find out why the IP69K rating is far more superior and how Baja Designs exceeds these standards:

Baja Designs - Moistureblock Blog



 
Interested in checking out Baja Designs Laser Lighting? Want to know how they compare to our LED offerings?

We are doing at night demonstration at Overland Expo West. Our booth will be set up during the day with our product line. Stop on by and check out the latest and greatest from BD!

Booth P10

Overland Expo West | 5/17-5/19
https://www.overlandexpo.com/west

47053813814_1c9ee7ec00_b.jpg

(XL Laser)

47053814164_0e2fe314a6_b.jpg

(Hybrid LED/Laser OnX6)
 
You must log in or register to reply here.

Similar threads

A
North Rim UTV Fun Run Story
Replies
0
Views
797
azop
A
utvwolfpack
Cage Builders and what to know
Replies
0
Views
1K
utvwolfpack
utvwolfpack
A
2023 Fire in the Sky Fun Run
Replies
0
Views
814
azop
A
A
Prickly Pine Cone UTV Fest Recap
Replies
0
Views
665
azop
A
utvwolfpack
Cage Pricing what to expect?
Replies
1
Views
2K
Matt Martelli - CEO
Matt Martelli - CEO

Members online

No members online now.
Total: 80 (members: 0, guests: 80)

Latest posts

Forum statistics

Threads
17,309
Messages
179,411
Members
12,150
Latest member
avakalanaya

Share this page

Back
Top