Wheel studs

[GOVACHO]

Does anyone know of a better grade wheel stud for the RZR 4 900 ? Any input would be great.. After this weekends outing this has to be upgraded and extra parts that need to be on hand.

 

[BiggJim]

Dumb question bart, but are you sure they were over tightened

 

[Glamisfan]

I measured everything on my race Rhino, and then researched what was available in the auto industry, and then ordered some Moroso 7/16" studs. Worked great!

 

[GOVACHO]

Dumb question bart, but are you sure they were over tightened

Could have been not sure. The wheels where installed at a shop....no names Rusty...lol...
But again my fault for not checking them myself..

 

[fishlips]

I had to change 2 of mine. its a pain in the ass. the brake rotor has to come off to get the studs out. next time I will shorten the studs by a 1/4 in. so they will fit.

 

[Queen Racing]

Impact guns are not allowed on studs in our shop! Yes, they are a crap grade! always galling up...

 

[BiggJim]

Anti Seize work wonders

 

[GOVACHO]

Ok, so I guess there are no real up grades for studs ? So just go with what I have on hand ( OEM ) ?

 

[crazywatson]

Mine were over tighten from the factory and snapped off on the first wheel change on one wheel. The rest have been fine.

Sent from my SM-N900V using Tapatalk

 

[calstyl2]

I have had numerous studs sheared off with our 800 Ranger crew, went to a non OEM stud.
We were running 28" Mongrels, also we were having this issue with one particular MFGs rim, no others, our twin Ranger crew with different wheels never had studs shear.

This is the Ebay site.
http://www.ebay.com/itm/POLARIS-RZR...Parts_Accessories&vxp=mtr&hash=item5d2f5c6f68

 

[Little Clod Buster]

Yes there is an upgrade its honda prelude studs you can get from arp. You have to upsize/drill hubs a bit. Get lug nuts from itp 12mm 60 degree bevel. You will never break another. bmzero has part #'s.