Wet clutch

[Craig]

Hey guys. quick question, my 07 Rhino is tacking out and losing speed, so i thought i would replace the belt, so while doing this i took the clutch apart (Hunterworks overdrive weights-orange secondary spring) to clean it and check how things look. All looked good and i put it back together. Took it for a test drive and still tacking out and a loss of speed, use to top out at about 58 MPH now i can hit 46 but its hitting some hard RPMS. Also about 5,000 miles on it now. I am thinking the wet clutch is on it's way out, butjust want a second that before i tear it apart.

Thanks
Craig

 

[Craig]

Never mind, i fixed it, the sliders on the face plate (one of them) was jammed nd would not let the primary clutch go to full exstend, fixed it and just hit 58MPH. happy again!

 

[Craig]

Breven's 06 Rhino is doing the same thing and he thinks the same way you are Craig!

I don't knowwhat i was thinking, the wet clutch wouuld not effect my top speed, It simply would not ingage if it was, so went back out and checked and it was one of the sliders, looks as if it got some dirt and would not work as designed.

 

[Craig]

All better now, and i can sleep like a baby.

 

[c&c rhino]

glad you found your problem. ive seen secondaries bind up and not travel all the way too. ive seen rust and belt strings hinder them.

 

[Craig]

Good for you Craig! Wouldn't want you to miss some sleep Hey Breven is heading your way on the 23rd for a job that is supposed to last a week? You'll have to PM him you contact info! But only if you want to

That would be very cool, sent him a PM this morning.