Question for Rhino Guys

EFAJEEP

Member
So my buddy has a 2007 660 with 130 hours on it. Last month he went to Alba and they installed the Alba Clutch Mod with Alba Full Exhaust and their Bored Carbs I think 44mil and a Pro Design Intake with K&N. The Alba Mods have maybe 4 hrs on them, before another friend od ours borrowed it and put the car on its side. Both sides of the a arms are a loss including the front spindles and shocks and the frame bent. Long story short it will be parted out and a new car will be purchased. Any Ideas on what he can get for the complete motor with all the mentioned mods, and maybe a price on what the diffs are worth? Thanks guys.
 
So my buddy has a 2007 660 with 130 hours on it. Last month he went to Alba and they installed the Alba Clutch Mod with Alba Full Exhaust and their Bored Carbs I think 44mil and a Pro Design Intake with K&N. The Alba Mods have maybe 4 hrs on them, before another friend od ours borrowed it and put the car on its side. Both sides of the a arms are a loss including the front spindles and shocks and the frame bent. Long story short it will be parted out and a new car will be purchased. Any Ideas on what he can get for the complete motor with all the mentioned mods, and maybe a price on what the diffs are worth? Thanks guys.

thats a perty much a stock motor i seen them sell as high as $1500 and as low as $800 ,diff go for about $350
 
youd probably be better off selling the motor separate from all the Alba parts, and selling those individually. Front diff, usually about 350, rear diff a little less, 250-300.
 
I will ask him, I know he wants a new one before he sells this one.

not sure on your location but you can contact benchmark performance or weller racing on a replacement frame. you can buy stock a-arms at offroad swampmeet or ebay as for spindle they run about a few hundred. do you have some pictures of the damage? I seen some bad rhino that get revived to ride again!
 
not sure on your location but you can contact benchmark performance or weller racing on a replacement frame. you can buy stock a-arms at offroad swampmeet or ebay as for spindle they run about a few hundred. do you have some pictures of the damage? I seen some bad rhino that get revived to ride again!
Thanks for the plug Louie! :)

Yes, we can even repair the chassis in many cases. If we can help with anything, let us know.
 
Thanks for the plug Louie! :)

Yes, we can even repair the chassis in many cases. If we can help with anything, let us know.

Thanks I will let him know. I think him and the driver are still hammering out the details and getting a "parts list" made up
 
I have a 2008 rhino frame for $500.00 the front and rear are straight the rear part of the cage where it comes up behind the passenger is tweaked. Rhino was rolled off a atv 50 inch trail going slower tham 10 mph driven by a 62 yr.old. It landed flat on it's top tweaking the bar that comes up behind the passenger seat. The senior driver took it for inspection to dealer and they seen insurance $$$$ for repair totaling 3200. I have pictures of the rollover if interested and pictures of an 2007 Rhino cage mounted on frame showing it mounted . my friend didn't need a new frame .
 

Members online

No members online now.

Latest posts

Forum statistics

Threads
17,310
Messages
179,412
Members
12,151
Latest member
avakalanaya
Back
Top