My XP1K build CarrOne, Nelson & Nelson, SSV Works

[crnacnac]

I just picked up a used '14 XP1000. Goodies it came with, CarrOne Worcs cage, Nelson and Nelson front arms with sway bar/bumper, full Muzzy's exhaust with controller, and chromolly radius rods with heims.




As with my two previous RZR builds I start off by relocating the instrument cluster to where I think it should be.

 

[crnacnac]

Lighting, 40" and 20" Totron Cree.
36" Rear led light bar with amber strobes

 

[crnacnac]

Light bar tabs welded in, single intrusion bar cut out, replaced with A bars and window net tabs cut off.

 

[crnacnac]

 

[crnacnac]

 

[crnacnac]

For the sound system I will be using some new equipment, everything from my XP900, and some stuff I have laying around collecting dust.

ALPINE EX-10-ipod interface with screen and remote
Audio Control Three.2 EQ
ALPINE PDX-V9 5ch amp biamped to ALPINE SPX-REF 6 1/2" componets+JL 10W3v3-2
ALPINE PDX-2.150 amp 2ch to ALPINE SPX-17MB 6 1/2" midbass
ALPINE PDX-M600 sub amp to JL 10W3v3-2
SSV WORKS Glove box sub enclosure RZ3-GBSB10 https://www.ssvworks.com/product/RZ..._+glove_box_+Sub_Box_with_600_watt_10_+woofer
SSV WORKS behind seat sub enclosure RZ3-BSSB10 https://www.ssvworks.com/product/RZ...+Behind+Seat+Sub+Box+with+600+watt+10_+woofer

If it is something I can fab, I always prefer to say "I made this" vs "I bought this", this time I'm making an exception and purchased the sub enclosures from SSV WORKS. Can I make full fiberglass sub enclosures? Sure I can, but the amount of R&D that went into these+the crafsmanship+the powder coated brackets, it's just not worth my time to build.



After some cutting, the rear led light bar fits perfect in the roof skin.

 

[crnacnac]

 

[crnacnac]

 

[crnacnac]

Fabbing the headliner, recycling my modified overhead Chevy console from my first RZR build. This cage has no radius so I had to grind down and clean up where it meets the headliner using Marglass, then ready to be wrapped with black suede.

 

[crnacnac]

Almost ready for stage 2 of the dash

 

[CSG]

Not really my thing but nice work with it.

 

[jajl22]

Definitely going to follow this build and see how it turns out...looks like your off to one heck of a start

 

[Rynomx785]

Impressive fiberglass work!

 

[PickupTrucker]

wow that was a good buy to start off with, you are doing great and thorough work too!

 

[JoeyD23]

Sick!

 

[crnacnac]

Fabbing the instrument cluster pod. I will be swapping out the oil pressure for an Alba CVT temp gauge.
Full tilt of the steering column is retained.

 

[crnacnac]

Mocking up the amps, welded in brackets.






After strapping this compressor in the bed of my last 2 RZR's, I wanted to make this a true onboard compressor.








This work I can't claim. This was done by one of the guys at the shop. I wanted some protection for my Muzzy's exhaust.

 

[crnacnac]

 

[jajl22]

coming along nicely

 

[crnacnac]