Hyper bead locks

[Utv133]

Thinking about getting some hyper bead locks for my rzr s
12x7 4+3. How much wider will these be plan on running 26-9-12 on all four rims I'm running all stock front rims and tires now . Will theses work if I go with a plus 8 long travel

Anyone have hyper wheel. Like dislike ???

What you guys think. Plus 6 kit or a plus 8 long travel kit For racing worcs


And which long travel kits do you guys like for the rzr s

 

[Slowpoke Rodriguez]

Ive ran Hipers for a while, with not one issue, 3 years in Worcs with better than a 3rd place average.

Great thing about them is the option to customize your offset and if you chose one and dont like it just by the 1/2 of the rim and change it

I would sugjest a 4/2 offset its close to stock on the outside and keeps your geometry very close, less stress and fatigue on bearing, balljoints etc.

I think 6 or 8 is fine, more important get a good kit and get the valving right

 

[mosslager]

4+3 will make you 1" wider at each corner. You will see more of the rear hub as well.

 

[Bajaxp]

I have some wheels you might be interested in. PM if interested.

 

[Utv133]

Really don't want my hub hanging out anymore . Rocks and what not


I was looking at the Lsr + 8 kit. Look big as hell for open desert it would be good. But worcs is tight Think I'm going with a plus 6 kit the ricochet rAcing long travel looks bad ass

 

[karter44]

You will be fine with a good +8 kit for worcs. Alfredo(#456) runs the LSR +8 with Hipers and does fine.

 

[Utv133]

It was looking at his setup. Looks big those tight areas have to be a handfull. What kit you got ?

 

[karter44]

I have a +6 kit from Tower Works. I also run hipers with no problem.

 

[karter44]

Really don't want my hub hanging out anymore . Rocks and what not


I was looking at the Lsr + 8 kit. Look big as hell for open desert it would be good. But worcs is tight Think I'm going with a plus 6 kit the ricochet rAcing long travel looks bad ass

That +6 kit is what I have and it's made by Tower Works. I really like this set up

 

[Utv133]

I don't wanna copy you. But that kit sick looking The +8 kit is only 1in more travel. So I think I'm going with +6

 

[karter44]

I don't wanna copy you. But that kit sick looking The +8 kit is only 1in more travel. So I think I'm going with +6

It's a great kit that works very well. Just spend the time to dial it in

 

[Utv133]

Where's everone buyin there hypers from. I was going to go with rocky mountain. But they only have 2 in stock. Looking for 4 4x2. Mounted with bighorn 2s

 

[karter44]

this is the one I run

 

[Utv133]

Looks great. I think if I do that kit I'm going to stick with afcos. So no bypass
Will duel exhaust fit

 

[karter44]

I believe it will with no bypass shock. The bracing for the bypass makes it so the muzzy dual wont fit.

 

[Utv133]

Thanks for the info . I will come by next weekend and check it out more and your buddy's Lsr kit. To make my mind up Where you buy your hypers from??

 

[karter44]

I was sponsored by them last year so I got them straight from Hiper

 

[Bajaxp]

I have some wheels you might be interested in. PM if interested.

PM's were sent to those that were interested.

 

[HiPer Glenn]

Thanks for the info . I will come by next weekend and check it out more and your buddy's Lsr kit. To make my mind up Where you buy your hypers from??

Get a hold of Dustin or Ace, they will get you any wheel info you need.