deviant_illusion
go to the UTVUnderground where there is cool SHIAT
My t4 bed sides should be here tomorrow.
Sent from my ADR6350 using Tapatalk
All UTV's T4 on a budget?
- Thread starter deviant_illusion
- Start date
My t4 bed sides should be here tomorrow.
Sent from my ADR6350 using Tapatalk
deviant_illusion
go to the UTVUnderground where there is cool SHIAT
T4 bedsides waiting on the porch today
deviant_illusion
go to the UTVUnderground where there is cool SHIAT
had a chance to work on it for a little bit tonight. started by cutting another massively bent piece of frame out.
Then fitted a new crossmember behind the engine
Then turned it into a little box.
Hopefully more to come this week.
Sent from my ADR6350 using Tapatalk
Then fitted a new crossmember behind the engine
Then turned it into a little box.
Hopefully more to come this week.
Sent from my ADR6350 using Tapatalk
deviant_illusion
go to the UTVUnderground where there is cool SHIAT
My garage looks like a war zone and I still have some bracing and welding but she is back on her own feet. Now I can measure for my driveline and send it out.
Sent from my ADR6350 using Tapatalk
Sent from my ADR6350 using Tapatalk
aaronjuarez
Member
Dude nice work. I love that you come up with an idea and just execute it. Hope everything comes out great!
deviant_illusion
go to the UTVUnderground where there is cool SHIAT
On step forward and 20 steps back.
Raising the roof
And a little getting a fill for some new lines.
Sent from my ADR6350 using Tapatalk
Sent from my ADR6350 using Tapatalk
Raising the roof
And a little getting a fill for some new lines.
Sent from my ADR6350 using Tapatalk
Sent from my ADR6350 using Tapatalk
deviant_illusion
go to the UTVUnderground where there is cool SHIAT
Was able to get a little bit done before Saturday honey do list.
Sent from my ADR6350 using Tapatalk
Sent from my ADR6350 using Tapatalk
Sent from my ADR6350 using Tapatalk
Sent from my ADR6350 using Tapatalk
deviant_illusion
go to the UTVUnderground where there is cool SHIAT
This thing is finally just about ready for aluminum work. If anyone is interested in the progress you can check it out here. http://utahoffroadadventure.com/forum/viewtopic.php?f=5&t=553
Last edited:
aaronjuarez
Member
Nice work I am glad to see it coming along
deviant_illusion
go to the UTVUnderground where there is cool SHIAT
Thanks, Took a good break from it for awhile and have been riding dirt bike tons but now its to hot to ride bikes so it time to finish it.
deviant_illusion
go to the UTVUnderground where there is cool SHIAT
So this thing has been running for awhile but I wanted to get some miles on her before I did a body just to make sure the chassis had no problems. She handles awesome. 65 mph now feels like 45 mph
Anyways started on the body yesterday at about 1 pm and worked till about 2 am. Still have a lot to do but it it's taking shape. I build and soldered a harness and wired Doug's rhino intercom while he worked on my aluminum. Then we both did the roof together.
Two small side panels per side and the roof and we managed to burn through 50 of the fancy over priced dzus fasteners so looks like I need to order about 24 more. The rear floor is bolted in with 3/8 ss button heads and other then the doors the rest of the panels will uses ss button heads.
Nearly $70 in dzus fasteners on just the roof alone.
Anyways started on the body yesterday at about 1 pm and worked till about 2 am. Still have a lot to do but it it's taking shape. I build and soldered a harness and wired Doug's rhino intercom while he worked on my aluminum. Then we both did the roof together.
Two small side panels per side and the roof and we managed to burn through 50 of the fancy over priced dzus fasteners so looks like I need to order about 24 more. The rear floor is bolted in with 3/8 ss button heads and other then the doors the rest of the panels will uses ss button heads.
Nearly $70 in dzus fasteners on just the roof alone.
deviant_illusion
go to the UTVUnderground where there is cool SHIAT
Mostly need to trim more of the fender to get it to sit correctly. The autofab body mounts are great and do allow some play. It was late and small alignment stuff will be taken care or on final assembly.
