After doing installs for the past couple of years in ALL of friend's Side by Sides, it is finally my turn to do my own install on my recently purchased RZR. The difference in this install is labor will not be a limiting factor
First off, the factory cage, seats and seatbelts where trashed and replaced with a custom cage by SDR Motorsports, seats by Jettrim, and Crow 5 point Y3" harnesses. There will be a linear actuated light bar contolled by the dual horn buttons on the Momo steering wheel.
On to the good stuff. Product to be installed:
/////ALPINE
iDA-X001
PDX-2.150
PDX-1.1000
(2)SPX-17REF
(2)SWS-1023D
TME-M750A
Other product to be installed as of right now, Optima yellow top, Lowrance Global Map 3500c GPS, four 4" HIDS, and a long travel kit.

First off, the factory cage, seats and seatbelts where trashed and replaced with a custom cage by SDR Motorsports, seats by Jettrim, and Crow 5 point Y3" harnesses. There will be a linear actuated light bar contolled by the dual horn buttons on the Momo steering wheel.
On to the good stuff. Product to be installed:
/////ALPINE
iDA-X001
PDX-2.150
PDX-1.1000
(2)SPX-17REF
(2)SWS-1023D
TME-M750A
Other product to be installed as of right now, Optima yellow top, Lowrance Global Map 3500c GPS, four 4" HIDS, and a long travel kit.






