is a relay needed to run 2 whip lights?

[sx230]

currently running 2 whip lights on rzr 1000 .but i was wondering , is a relay necessary ? thanks in advance

 

[crazywatson]

I wouldn't. Whips don't draw much power.

Sent from my SM-N920V using Tapatalk

 

[Rynomx785]

No whips draw hardly any amperage at all.

The Cordura switches handle 20 Amps and 2 whips is under 5 Amps so just the switch will be fine.

 

[utvwolfpack]

Just run a fuse and you should be good. Just make sure the fuse is Rated for whatever the draw would be for the LED Whips. Another thing that people don't think about is having the wires from the whips in a sleeve so that they do not have a chance of rubbing raw and grounding out.

 

[sx230]

Just run a fuse and you should be good. Just make sure the fuse is Rated for whatever the draw would be for the LED Whips. Another thing that people don't think about is having the wires from the whips in a sleeve so that they do not have a chance of rubbing raw and grounding out.

sounds good yes i did wrap all wire in flex tube .found out the whip lights i purchased were defected ,caused them to go out . thanks for reply