Recent content by mochoa

  1. M

    Polaris help! rzr 800 leaking oil out of stator/flywheel cover

    thanks for the reply. I agree I should just replace the seal. Hate to ask but does anyone have any input on how to replace the seal? Service manual doesn't really provide any info. Thanks in advance
  2. M

    Polaris help! rzr 800 leaking oil out of stator/flywheel cover

    help!!
  3. M

    Polaris polaris rzr front differential output hub

    A little late but here was my fix for this problem. I got a whole saw and cut out the right size caps. I tacked welded as much as I could and JB welded the rest, I made sure everything was a clean as possible and never had any issues with it again. Hope my fix can help someone in the future...
  4. M

    Polaris help! rzr 800 leaking oil out of stator/flywheel cover

    Hi Everyone, looking for some input on a oil leak. I took my motor and trans out of 08 rzr 800 due to a leak in my tranny. while everything was out I also noticed a leak in the stator/ flywheel cover. I took the cover out and a good amount of oil came out. I noticed I had a little to much oil...
  5. M

    Polaris polaris rzr front differential output hub

    will making a wall out of JB weld instead of using silicone be better? Thanks, only other thing I can think of is getting nickel size thick pieces of axle splines and jb welding or actualy welding them to the hub. The axles splines allow a little bit of clearance to do so
  6. M

    Polaris polaris rzr front differential output hub

    thanks for all the info, anymore ideas on how to fix would be appreciated thanks for all the ideas so far
  7. M

    Polaris polaris rzr front differential output hub

    I think the bad news is I need both the female and the male? I thought about just buying a used diff. So what happens if those walls aren't their? Will the diff oil just leak out the splines? Anymore ideas or comments are welcomed. Thanks
  8. M

    Polaris polaris rzr front differential output hub

    I dremeled them in the middle where the the splines are located
  9. M

    Polaris polaris rzr front differential output hub

    Here are some pictures of them afterward I dremeled them
  10. M

    Polaris polaris rzr front differential output hub

    Need some help, hope someone has some knowledge on this. I needed to remove my axles and cv's from my diff. for something else I was doing, I had previously had a rhino so I was used removing one cv and then hitting the other out so I tried the same method not reliazing the output hub had a thin...
  11. M

    polaris rzr800 longtravel/ground clearance help

    finally getting back on resolving the issue I was wondering what spring rate other people are using on their long travel kits? I have seen anything from 150-275lbs in the front alone Thanks in advance
  12. M

    polaris rzr800 longtravel/ground clearance help

    what brand or wieght are recommnded?
  13. M

    polaris rzr800 longtravel/ground clearance help

    when you bought new shocks were you able to keep your fabtech springs or did u upgrade those too?
  14. M

    polaris rzr800 longtravel/ground clearance help

    definately agree on the spring rate I'm hoping the valving on the shocks are ok since those were the shocks that came with the kit (maybe I should check the psi on the shock?) took a better look yesterday and I only have maybe 2" of actual shaft showing the shock so most of my travel is down...
  15. M

    polaris rzr800 longtravel/ground clearance help

    I bought a Polaris rzr800 with fabtech 6+ long travel kit with dirt logic shocks. The kit is suppose to have 12-13" of travel but the car only has 10" of clearance w/out driver or passengers? I did take it out with a passenger and my self in the car (170lbs and 200lbs) and everything was great...
See more

Members online

No members online now.
Total: 27 (members: 0, guests: 27)

Latest posts

Forum statistics

Threads
17,331
Messages
179,439
Members
12,163
Latest member
Blaster

Share this page

Back
Top